PROMAS GmbH, Germany

Powder Coating Line make Eisenmann

complete, consisting of:

Spray pre-treatment:
zone 1: pre-degreasing
tank volume 4,4 m³
coating temperature 60° C
spray capacity 147 m³/h
spray pressure 1,5 bar
motor 11 kW
heating capacity 220 kW
heating medium HW 90/75 ° C
exhaust air 6000 m³/h
motor 1,5 kW

zone 2: degreasing
tank volume 4,4 m³
coating temperature 60° C
spray capacity 147 m³/h
spray pressure 1,5 bar
motor 11 kW
heating capacity 220 kW
heating medium HW 90/75 ° C

zone 3a: washing 1
tank volume 2,0 m³
coating temperature not heated
spray capacity 60 m³/h
spray pressure 1,2 bar
motor 4 kW

zone 3b: washing 2
tank volume 2,0 m³
coating temperature not heated
spray capacity 60 m³/h
spray pressure 1,2 bar
motor 4 kW

powder cabin
min. exhaust air 10.800 m³/h
motor 18,5 kW
sieving machine:
motor 0,16 kW
lighting 4x2x58 kW

max. allowed spray guns: 2 pieces
max. allowed powder output each spray gun: 2.250 g/min.
sprayed powder quantity max. 4.500 g/min. at a lower explosion limit (UEG) for tested powder pigments of 50 g/m³ air

work piece sizes:
width 800 mm
height 1500 mm
length 2000 mm, max. 3000 mm
weight max. 100 kg

Additionally to the layout, the line has a modern plastic booth for manual coating. Spray guns are in state-of-the-art-technology. The line and all accessories are completely cleaned (for example water treatment / neutralisation).

The line can be seen on demand. Please contact us to arrange an appointment for a visit.