PROMAS GmbH, Germany

Veneer Butt Joining Machine make Kuper type FW/L-1200 V

throat 1200 mm
veneer thickness approx. 0,4 - 2,0 mm
veneer length from approx. 400 mm
veneer strip widths from approx. 50 mm
feed infinitely variable approx. 10-50 m/min
drive 1,1 kW
operating voltage 400 V, 50 cycles, 3 phases +MP
total connected load 6,5 kW
air consumption approx. 600 NL/min
lacquer finish RAL 6011
net weight approx. 1205 kg

for longitudinal splicing of pre-glued veneer edges approx. 0,4 - 2,0 mm thick

Gluing with a special PVAC-glue which has been applied to the veneer edges
by a separate gluing device before (KUPER KLM).

The PVAC-glue is activated in the machine by means of a special heating system. Splicing of the veneers is effected by a sensitive disc system.

The special PVAc-glue is a rapid hardening and joint filling PVAC-glue.

For the splicing of wavy veneers the joint can be reinforced by simultaneous application of a glue thread.

Special features of the machines are high thru feed speed and easy operation.