Description Double-sided Edge Processing Line make IMA
type Combima K / II / R 80 / 1320 / F / vR
Panel Sizing of glued blank parts, for cross and longitudinal working,
for milling of rebates, banding of rebates with pre-glued 1-strip-edge materials
and finish working.
Right machine, left machine side movable.
Technical data:
edge material: veneer coated with synthetic hot-melt adhesive resin, reel material
min. strip length approx. 220 mm
min. strip height approx. 14 mm
max. strip thickness approx. 0,8 mm
min. work piece length approx. 350 mm
min. work piece thickness approx. 20 mm
max.work piece thickness approx. 60 mm
fix work piece overhang
from the chain conveyor
each side approx. 80 mm
min. thru feed width
a) at longitudinal thru feed without cams: approx. 350 mm
b) at cross thru feed with cams: approx. 350 mm
max. thru feed width approx. 2500 mm
feed speed approx. 6 – 30 m/min.,
feed speed is not working speed of 18 – 20 m/min.!
operating voltage 380 V 50 cycles, 3 phases
chain track extension for approx. 2300 mm
chain with special cams
left chain side with 2 pcs. by approx. 500 mm traversing aligning elements for the angular cut when working longitudinal, consisting of:
a) 2 pcs. lateral pneum. aligning devices at the left and right side
b) 2 pcs.. pneum. controllable lifting rails stroke rails
c) 1 pc. pneum. traversing clamping device with a fix fence and an adjustable clamping device referring to the door length; the doors have to be prepared with approx. 60 mm; when working with cross feed the work pieces are taken by both chain cams, at longitudinal feeding only by one chain cam in the left transport chain
electronically width adjustment
Panel sizing part:
2 x pre-scoring saw, 2,2 kW, 100 cycles, 6000 rpm, pneum. controllable as well as laterally controllable on 2 fix points
2 x hogging units, 7,5 kW, 100 cycles, 6000 rpm
2 x milling units for hogging, 7,5 kW, 100 cycles, 6000 rpm, controllable
2 x milling units, 4,4 kW, 100 cycles, 6000 rpm, controllable and tiltable 90°
1 x grooving unit, left, 2,2 kW, 100 cycles, 6000 rpm
1 x free space – right side
2 x milling unit, 1,0 kW, 200 cycles, 12000 rpm, for milling of round edges and cornice profiles, left side with pre-scorer, with lateral disengagement
1 x inkjet printer at the right side for imprinting the product information on the underside doors
2 x closed gluing part with activating unit 10 kW for with SK pre-coated edge material, each side with 2 pcs. Leister hot air blowers
2 x 6-fold roller magazine
2 x edge pressure rolls, each 1 over main pressure roll and 2 finishing pressure rolls
2 x rebate forming track, approx. 1000 mm long
Edge finishing:
2 x edge trimming units with each 2 motors 150 W, 200h cycles, 12000 rpm, 25° tiltable
2 x rough milling units top and bottom, 400 W, 200 cycles, 12000 rpm
2 x fine milling units top and bottom, 150 W, 200 cycles, 12000 rpm
2 x rebate trimming units for trimming of the lateral rebate at the front side of the door, each one motor with horizontal saw and vertical stroke, 150 W, 200 cycles, 12000 rpm
2 x chamfer units, each one motor 150 W, 200 cycles, 12000 rpm, 2 x 3 buffing units 0,55 kW, 50 cycles, 3000 rpm
2 x corner milling units (for rounding, profile milling, radius milling, cornice, each one motor 150 W, 200 cycles, 12000 rpm
2 x staining devices, 1 pc. frequency converter 30 kVA, 100 cycles, 1 pc. frequency converter 10 kVA, 200 cycles
machine length approx. 20 m
Single-sided Bargstedt Vacuum Feeder in pit execution with lifting table
Single-sided Bargstedt Vacuum Stacker in pit execution
|
