PROMAS GmbH, Germany

Postforming Edge Bander make HOMAG type VF 79/D

Equipment:

1. Hogging saw 1 kW – to saw straight edges
2. Laminate router 1 kW – joint cutting / profile routing possible
3. Blow-off and cleaning station
4. Glue application roller top left
5. 4 Glue application nozzles with automatic glue pump
6. Glue application roller lateral left
7. Laminate heating, heating fan lateral + top
8. Radiant heater from bottom, each 2 x 3 rows of heater tubes 900 mm long,
total length of the heating zone bottom 1800 mm
9. Bending zone radiant heaters from bottom, 2 heating tubes 900 mm long
10. Pressure zone 4-fold adjustable, metal pressure rolls for profile,
plastic pressure rolls for further profiles available
12. Router from top 0,6 kW / 300 cycles, scanning
13. Blow-off nozzle / cleaning station
14. Glue application station for PU-glue with Nordson PU glue system MC 7
15. At the rear side of the infeed zone there are 2 routers to remove overhanging
veneer edges.
16. Additionally there is at the rear side of the infeed zone a pressure zone
opposite to the guiding fence

central lubrication
electrical height adjustment
sound enclosures over the routing area
machine dimensions: l 10 m x w 1,6 m, h 1,5 m
thru feed width single-sided: approx. 125 mm up to 1000 mm
bending radius min. R = 3, prepared for R 3 of 0,7 CPL
work piece thickness approx. 16 – 40 mm
laminate thickness approx. 0,4 – 1,2 mm depending on material
feed infinitely variable approx. 3 – 18 m/min.
frequency converter 165 Volt, 300 cycles
weight: approx. 7000 kg

Completely checked and ready for operation!