Staklės medžio apdirbimui ir baldų gamybai

-

PROMAS GmbH, Germany

  
 
Jūs esate čia: PROMAS GmbH, Germany / Medienos apdirbimo įranga (used) / Medžio lukšto apdirbimas / Kuper Veneer Cross Splicer Zig-Zag - second-hand FWQ 2800
 
Navigacija:
Kalba
  • Deutsch
  • English
  • Ukrainian
  • Russian
  • Lithuanian
  • French
Paieška:
PROMAS GmbH
Dieselstraße 1
D-32683 Barntrup

Tel. Nr.: +49 52 63 / 955 05 -0
Faks.: +49 52 63 / 955 05 -29

El. p.:

Puslapio žemėlapis | Rekvizitai | Sold machines

Kuper Veneer Cross Splicer Zig-Zag - second-hand FWQ 2800

Staklių numeris2807
Staklių pavadinimasVeneer Cross Splicer Zig-Zag - second-hand
TipasFWQ 2800
GamintojasKuper
Aprašymas

Veneer Cross Splicer Zig Zag make Kuper type FWQ 2800

Technical data:
max. working width in fiber direction 2800 mm
min. working width in fiber direction approx. 550 mm
width of veneer strips cross to fiber from 65 mm
veneer thickness approx. 0,4-2,5 mm
feed speed of gluing unit, 7 steps 40-70 m/min
working height from floor 930 mm
operating voltage 380 V, 50 cycles, 3 phases
total connected load incl. storage 10 kW
actual power consumption 2,1 kW
compressed air connection G 1/4“
operating pressure 7 bar
max. compressed air consumption 140 NL/min.
stacking width longitudinal to fiber 550-2800 mm
stacking length cross to fiber 400-1900 / 2900 mm
max. stacking height from floor 650 mm


Nuotraukos

Kuper Veneer Cross Splicer Zig-Zag - second-hand FWQ 2800Kuper Veneer Cross Splicer Zig-Zag - second-hand FWQ 2800Kuper Veneer Cross Splicer Zig-Zag - second-hand FWQ 2800Kuper Veneer Cross Splicer Zig-Zag - second-hand FWQ 2800Kuper Veneer Cross Splicer Zig-Zag - second-hand FWQ 2800