Aprašymas Edge Banding Machine make IMA type Compact 520
left hand design
TECHNICAL DATA
edge material:
a) veneer-/roller and strip material
b) plastic-/roller and strip material
c) solid wood strip
min. edge height approx. 14 mm
max. edge height approx. 55 mm
min. edge thickness approx. 0.4 mm
max. edge thickness approx. 20 mm
min. panel thickness approx. 10 mm
max. panel thickness approx. 50 mm
min. panel width approx. 85 mm
min. panel length approx. 150 mm
max. strips approx. 20 x 55 mm
panel overhang out of chain conveyor approx. 35 mm
rigid drive for thru feed speed of approx. 16 m/min.
mains voltage 3 x 220/380 Volt, 50 cycles
control voltage 220 V, alternating current
BASIC MACHINE, consisting of:
- basic frame, steel column, welded, simultaneously support for
chain conveyor and units as well as housing for installation of
electrics
- drive for work piece transport by gear motor with fix rotation
feed speed approx. 16 m/min.
- continuous conveyor chain with 80 mm wide and 60 mm long chain plates
- continuous upper pressure equipped with:
- 2 lines rubberized rollers, roller diameter 70 mm, roller width 25 mm,
- height-adjusting column, height adjustment central by hand wheel abt. 50 mm
EQUIPMENT DETAILS:
- basic machine
- supporting table with fix, heated, temperature controlled fence ruler
gluing unit with:
- a hot-melt adhesive glue supply
- a separate glue roller drive, a roller and strip magazine,
max. roller diameter 600 mm
- a main pressure roll and 5 additional pressure rolls
post-pressure station separate by approx. 20 mm adjustable,
pressure roller individually lateral cushion and adjustable
- dividing knife, electro-pneumatic controlled up to 3 mm edge thickness
- end trimming unit
for end trimming of front and rear strip overhang, for
trimming cut flush or with one chamfer, horizontally
by hand approx. 25 degrees tilting, with lateral tracing
with 1 front and 1 rear motor 0.4 kW, 133 V, 200 cycles, 12000 rpm
max. end trimming cross section approx. 65 x 10 mm
max. end trimming cross section approx. 55 x 15 mm
max. end trimming cross section approx. 50 x 20 mm
max. working speed approx. 16-18 m/min.
with 1 front and 1 rear HM-trimming saw blade 160 x 22 mm, T = 48
min. panel overhang approx. 30 mm + max. profile thickness,
min. panel length approx. 200 mm
min. distance between two work pieces approx. 600 mm
incl. DC brake for two motors à 0.4 kW, 200 cycles
- pre-trimming/flush trimming unit 08.0555
for the pre-trimming/flush-trimming of the upper and lower overhanging
edge material, only for panel thicknesses of more than approx. 25 mm,
swivelling about 3 degrees, tracing from the top and bottom, without
lateral tracing,
with 1 upper and 1 lower motor each 1,0 kW, 133 V, 200 cycles, 12000 rpm,
positioned one-above-the-other, incl. DC. brake for 2 motors à 1000 W, 200 cycles
- fine-trimming/radius/chamfering unit
for fine-trimming/radius-trimming/chamfering of the upper and lower
overhanging edge material, not swivelling, with upper, lower and lateral
tracing, autom. height adjustment by top pressure beam, fine-adjustment
as well as lateral adjustments with mechanical digital display, with 1 upper and
1 lower motor à 0.15 kW, 133 V, 200 cycles, 12000 rpm, incl. DC brake for 2 motors 150 W, 200 cycles
- sound absorption / protection hood for covering of trimming unit
as well as flush milling unit
- single suction nozzle at milling units
- free space
- profile-scrapping unit
for re-scrapping of a upper- and lower milled quarter-cycle profiles
lateral tracing, with 1 upper and 1 lower HM-drawing tool,
with mechanical digital display 09 for horizontal and vertical
adjustment, with single suction nozzle
- chamfer sanding/buffing unit
for re-cleaning of upper and lower flush-milled edge materials
in are glue groove, horizontal not controllable, tilting by
a vertical and horizontal axis, with 1 upper and 1 lower
motor 0.55 kW, 220/380 Volt, 50 cycles, 3000 rpm
1 frequency converter 6 kVA, sec. 133 V, 200 cycles
1200 rpm, protective system IP 54, with switch parts,
without automatic star-delta starter
total electrical connected load: 12 kW/30A
air connection: 3/8\", min. 7 bar, supply line min. 1/2\"
Length: approx. 5600 mm
Width : approx. 1300 mm
Height: approx. 1900 m
|
