Aprašymas Edge Banding Machine make Brandt OPTIMAT KD 68 CF
built 2002
single sided edge banding machine in right design for hot melt gluing
glue temperature control via electronically thermostat, automatic lowering of glue temperature at working stops, Infra-red hot melt glue activating, automatic edge magazine for roller material and fix lengths, incl. roller disc diameter 800 mm
equipment with reinforced pre-trimming saw fort hick PVC/ABS max. 3 x 45 mm, standard equipment with edge and work piece distance control by means of optical display, pressure zone with driven main drive roller as well as 2 free running finish pressure rollers. standard equipment with manual central lubrication for transport chain
central adjustable top pressure, integrated line control for touch less control of processing functions, adjustable via keyboard and LED-display, electrical equipment with modular control system for easy operating
Standard equipment:
adjustable infeed fence
joint cutting unit 2 x 2,2 kW, 200 cycles, for jointing in front of the gluing part, vertical spindle adjustment, electro-pneumatically control horizontal, 2 motors (1 x parallel, 1 x counter run), max. stroke 3 mm, cover hood with suction socket diameter 120 mm, 2 DIA jointing cutter heads, diameter 100 x 48 x diameter 30 mm, Z = 3 + 3, spline groove 8 x 3 mm, max. work piece thickness 42 mm
trimming unit chamfer/straight
for trimming of the front and read edge overhang with eccentric position of the knife for high precision
edge dimension: max. 8 x 45 mm; 2 motors each 0,27 kW, 200 cycles, 12.000 rpm, tiltable 0-15 degrees straight to chamfer, equipped with 2 end trimming saws diameter 100x32x2,6 mm
flush milling unit top and bottom with vertical and horizontal scanning, tiltable 0 - 15 degrees, 2 motors each 0,40 kW, 200 cycles, 12.000 rpm, equipped with 2 WPL-combination cutters straight/radius, diameter 56/50 x 16 x 16 mm, Z = 4, r = 3 mm
form milling unit top and bottom, for form milling of head edges at postforming and softforming parts and corner rounding of thick PVC-edges, restricted use of wooden edges, depending on pre-tests, 2 motors each 0,35 kW, 200 cycles, 1200 rpm, edge thickness max. 3 mm (radius), standard equipment with 2 pcs. radius cutters r = 3 mm, diameter 73/61x16x16 mm, Z = 3 pneumatic adjustment form milling unit, for lateral movement of the unit out of the working range
scraper with quick change heads, scanning from top, bottom and lateral
for chamfering or rounding of pre-milled PVC edges, max. edge thickness 3 mm, height adjustment of the upper part with the top pressure, incl. 2 quick change heads for easy change of radius, with 2 WPL profile knives r = 3 mm.
buffing unit 2 motors
to make edges grip top and bottom, 2 motors each 0,09 kW, adjustable in height and inclinable, 2 Molton discs diameter 120 x 20 m
sound protection incl. central suction sockets diameter 100 mm.
allowed ambient air temperature min. +5 degrees/ max. +35 Grad degrees
Technical data:
edge thickness 0,4 - 8 mm ,
roll end trimming max. 3 x 45 mm
work piece thickness 8 - 40 mm
work piece width min. 65 mm
work piece length min. 160 mm
feed max. approx. 11 m/min.
electrics 400 V - 3 phases - 50 cycles
pneumatics min. 6 bar
connected load approx. 12 kW
total length 5.740 mm
G.0001 Number: 4811 1 x right
TOOL KIT R = 2 MM (exchange against r=3 mm)
instead of standard cutter r = 3 mm, the machine is equipped with tools r = 2 mm.
G.0004 Number: 2 x 4-014-02-0382
INSERTED TOOTH CUTTER JOINTING 100X56X30; Z=2X3; KN=2/ 8X3
instead of DIA cutters VKNR 4792!
|
