Описание станка Single-sided Edge Banding Machine make IMA type QUADROMAT 4012 F
Rigid machine as carrier for the units as well as cabinet for electrical installation.
Single-sided working. SPS controlled.
Pre-milling and copying!!!
Edge material:
a. veneer- /reel material
b. plastic-/reel material
c. massive wood strips
min. strip height approx. 14 mm
max. strip height approx. 50 mm
min. edge thickness approx. 0,4 mm
max. edge thickness (pre-cut strips) approx. 12 mm
min. panel thickness approx. 10 mm
max. panel thickness approx. 70 mm
min. panel width approx. 60 mm
min. panel width approx. 200 mm
max. panel length approx. 3600 mm
max. edge height about panel top and bottom 2 mm
panel size out of the feeding belt approx. 37 mm
drive for thru feed speed forward and return 18 m/min.
power supply 3/N, 50 cycles, 380 V + / - 5 %
control voltage 24 V DC
main machine with feeding
Machine with integrated “boomerang”.
The work piece runs thru the machine and comes back to the operator.
Example:
IMATRONIC SPS control with master device and control panel
Electrical installation acc. EN, logic elements in the basic frame,
control in a separate control desk attached.
Safety and protection device according CE regulations.
Lacquer finish of the main machine and the sound enclosure protection hood (without covers) according RAL 9002 silk matt, smoothly security and protection device as well as covers of the protection hood according RAL 3001 aggregates according RAL 7037
Machine inscription: German or English (additional price !)
Manual and spare parts list 1-fold.
Materials required for installation to be provided at site.
Technical data:
-Edge material: A. veneer/role and strip commodity
-plastic/role and strip commodity
- solid wooden strips min. edge height approx.. 14 mm of max.
Mains voltage: 3/N, 50 cycles per second, 400 V control voltage: 220 V alternating current pneumatics connection: approx. 7 - 8 bar
Equipment details:
Main machine 4012 F
Supporting table with firm, notice ruler
Buffing units reciprocating to the buffing of the upper and lower concise-milled Edge material or for polishing thick PVC edges horizontal controllable, not, tiltable around a vertical and horizontal axle with 2 engines 0.25 KW, 230/40OV, 50 cycles per second, 1500 rpm, with ever 1 buffing wheel diameter 190 x 40 x 15 structure height 235 mm
Flat scrapers drawing blade equipment for removing of glue rests at the upper and lower work piece surfaces completely with accumulating roles and drawing blades
Round scrapers for finishing an upper and a lower milled quarter circle profile at up-glued ABS or PVC edge materials, with pre-set TC drawing blade tools R = 3 (standard) with elevator palpation, laterally, with mechanical digital displays 09 for horizontal and vertical adjusting with electro-pneumatically horizontal disengage device for the upper and lower drawing blades unit, with electro-pneumatically more vertical from back device for the lower drawing blade unit, with single suction nozzle,
Glue part, with:
-thermoplastic adhesives an indication of glue
- rolling and a strip magazine max. role diameter 860 mm of panels, up to 12 mm
of a main feed roll and 3 additional pressure rolls
- reproduction station separately over approx.. 12 mm positionable, feed rolls individually laterally
fitted with springs and adjustable
- cutting knife for max. edge strength of 3 mm electro-pneumatically steered max.
milling aggregate
a) Operational area as repair machine and for the production of a peel off-free edge at the work piece, in particular with the processing of plastic-coated chip boards in connection with strong PVC edges (3 mm)
b) Execution with adjustable infeed roll, with digital display for horizontal adjusting for the exact determination of the splinter acceptance c) with 2 engines (run in
synchronization and in reverse) A 3000 W, 400 V, 200 cycles/sec. 12000 rpm
- not tiltable, controllable, with digital display for the horizontal and vertical adjustment, with TC tools, diameter approx. 100x56x30 Z=2x3 without profile milling tools, with blowing nozzle for removing loose particles, at the work piece side,
with IR emitter zone for possible warming up of the work pieces before the gluing, with single suction nozzle diameter 2 x 80 upward implemented with static frequency static frequency changer 9 kVA, 200 cycles per second with electronic exhaust brake
combination units for the fine milling or profile milling of the lower longitudinal fold as well as the front and rear edge, with heights and side palpation, pneumatic feed motion horizontal and vertically. Manual adjustment to the edge strength. Engine adjustment in axe and radial direction takes place manually, with 1 engine 660 W, 400 V, 200 cycles per second, 12000 rpm, engine laid out for reverse with quick change mechanism, with TC tool R = 3 (standard) structure height 235 mm, min. 35 mm work piece-stood + edge strength min. distance between 2 work pieces: approx.. 600 max. operating speed: approx. 16 m/min. min. work piece thickness when corner copying 16 mm
Cutting aggregate to caps of the front and rear edge overhanging of conditions, electro-pneumatically tiltable to concise caps in the angle the 90 degree or with one chamfer from approx.. 8 degrees with 2 engines 400 W, 400 V, 200 cycles per second, 12000 rpm, with 2 TC cutting saw blades 160 x 3.2 x 22 Z of 36 max. Cutting cross section:
a) Wooden strips 12/20 x 45
b) PVC panels 3 x 40
c) plastic and veneer rolls of 3 x 45
Sound /protection hood for the cover of the cutting aggregate as well as the concise milling aggregate, with 3 pieces of suction nozzles 0,100 mm
Static frequency static frequency changer 200 cycles per second for cutting aggregate and concise milling aggregate completely with electronic exhaust brake
Supporting bar for wide work pieces, extendable by approx.1500 mm
|
