Опис верстату Double-sided Edge Processing Machine for Softforming - second-hand
machine 1: longitudinal processing
working width min. 260 mm, max. 1.100 mm
edge thickness max. 1,7 mm
thru-feed speed 8 - 40 m/min.
•rolling needle bearing chain, motor 3 kW, infinitely variable adjustable 8 - 40 m/min.
•motorized width adjustment with electronical nominal-actual display
•size part: double hogging unit with 2 motors 6,6 kW, 100 Hz, adjustable with Siko-display
•back side: milling unit with motor 1 kW, 200 Hz, synchronised speed with height tracing
•milling unit with 1 motor 4,4 kW, 100 Hz, tiltable, adjustable with Siko-display
•edge magazine for 2 rolls for pre-coated edge material, hot air blower
•long pressure zone with pressure shoes for roof-profile, ton-profile and S-profile
•milling and chamfer unit with 2 motors 0,6 kW, 200 Hz, 12.000 rpm, counter rotation, HSK
•grooving, rabbet, profile milling unit with motors 3 kW, 100 Hz, 6.000 rpm
•flat scraper unit
•buffing unit with 2 motors 0,55 kW, 1.500 rpm, tiltable
turning device longitudinal-cross
machine 2: cross processing
working width max. 3.150 mm
edge thickness approx. 0,8 - 3 mm
•rolling needle bearing chain, motor 3 kW, infinitely variable adjustable 8 - 40 m/min.
•motorized width adjustment with electronical nominal-actual display
•pre-milling unit with Motor 3,3 kW, 100 Hz, 6.000 rpm
•double-hogging unit with 2 motors 6,6 kW, 100 Hz, 6.000 rpm, adjustable with counting device
•air lock
•edge magazine for 2 rolls for pre-coated edge material, hot air blower
•end-trimming unit with 2 middle frequency motors 0,2 KW up to 25° tiltable, Vf=28 m/min.
•fine-milling unit with 1 top and 1 bottom motor 0,6 kW, 200 Hz, 12.000 rpm, 30° tiltable, HSK, top and bottom tracing, lateral tracing
•contour milling unit with 2 motors 180 W, 18.000 rpm, up to R= 3,5 mm, tracing roll 7 mm
•grooving, rabbet, profile milling unit with motors 3 kW, 100 Hz, 6.000 rpm
•flat scraper unit
•buffing unit with 2 motors 0,55 kW
Beckhoff control from
electric cabinet 400 V
control voltage 24 V
2003 is the year of general rebuilding!
|
